What I just discovered

Hey, I’m reading The Art Of Thinking Clearly by Rolf Dobelli on Blinkist. Blinkist offers the best knowledge from nonfiction in powerful, memorable packs.

http://blinki.st/b089853fda4e?chapter=53734a096434360007870000

Advertisements

How can one work with UART in Full Duplex Mode having simultaneous transmit and receive operations?

My answer to How can one work with UART in Full Duplex Mode having simultaneous transmit and receive operations?

Answer by Shaunak Agastya Vyas:

Finally I solved the problem myself. I am able to get the communication working now. I am using FIFO Buffer of UART Module for that. My ARM1 is more critical than ARM2. As this is asynchronized communication, I fill the FIFO of ARM1 first with 8 bytes of data (that is my requirement). It takes around 0.56 ms (8*8/115200) to transmit and fill the Receiver FIFO of ARM2. After receiving data, I immediately store it in an array to get processed and flush the receive FIFO buffer. I have set the FIFO receive interrupt limit as 8 bytes. I am not using transmit interrupt at all. Rather I am flushing the transmit buffer before putting data in it. The ARM2 to ARM1 transmit happens the same way. So, FIFO has helped me to solve this and do the communication without setting anyone as master or disabling interrupts.
How can one work with UART in Full Duplex Mode having transmit and receive functionalities working simultaneously? – ResearchGate. Available from: https://www.researchgate.net/pos… [accessed Dec 18, 2016].

How can one work with UART in Full Duplex Mode having simultaneous transmit and receive operations?

Is it possible to make use of micro controllers instead of using MCB and ELCB for protection in house?

My answer to Is it possible to make use of micro controllers instead of using MCB and ELCB for protection in house?

Answer by Shaunak Agastya Vyas:

Yes, it is possible. What you can do is you can drop down the line voltage and current to microcontroller level, measure the quantities using ADC of microcontroller, set the threshold levels of trip and do the same job. If you use some kind of DIP switches, then you can make this threshold level programmable using the combination of the switches.

  • Shaunak Agastya Vyas

Is it possible to make use of micro controllers instead of using MCB and ELCB for protection in house?

Is it possible to be incapable of feeling love?

My answer to Is it possible to be incapable of feeling love?

Answer by Shaunak Agastya Vyas:

The person who has this question, has to ask himself/herself: Is it impossible to be capable of feeling love? The answer has to be a big “NO”. Love is life.

Shaunak Agastya Vyas

Is it possible to be incapable of feeling love?